Bill of Materials v14.03
NortdLabs
For convenience, NortdLabs sells many Lasersaur parts and assemblies.
These parts can also be sourced from
our suppliers
directly but may require extras work. Some parts are exclusive
NortdLabs parts. You are encouraged to fabricatate these yourself.
If you feel so inclined check out our
CAD files.
Alternative suppliers for consumables (mirrors, lenses, etc) are
listed on the
Operation page.
| # | item | subsystem | order# | price | total |
|---|---|---|---|---|---|
| 1 | Cable Ties |
y-drive
4/24x - 4x belt to cart
x-drive 4/24x - 4x belt to cart optics-laser 16/24x - 16x cable and hose to laser tube |
la-zip | 6 | 6.00 |
| 1 | Door Sensor Pack |
frame-door
1x - 2x door sensors, 2x door sensor magnets
|
la-dsp | 50 | 50.00 |
| 1 | DriveBoard DIY Pack |
electronics
1x - controller board
|
la-dbdy | 206 | 206.00 |
| 1 | DriveBoard Wiring Pack |
electronics
1x - DriveBoard wiring, laser, chiller, power, data
|
la-dwp | 82 | 82.00 |
| 1 | E-Valve Assembly |
air-assist
1x - air assist flow control
|
la-evas | 50 | 50.00 |
| 1 | E-Stop Assembly |
electronics
1x - DriveBoard emergency stop button
|
la-estp | 34 | 34.00 |
| 1 | GT Timing Belt Pack |
x-drive
1/3x - 1x 3060mm drive belt
y-drive 2/3x - 2x 1840mm drive belt |
la-gtb | 95 | 95.00 |
| 1 | LasersaurBBB (BeagleBoneBlack, Wifi, configured) |
electronics
1x - controller board
|
la-bbb | 95.0 | 95.00 |
| 1 | LED Illumination |
electronics
1x - bed illumination
|
la-lite | 58.0 | 58.00 |
| 1 | Limit Sensor Pack |
y-cart
2/8x - 2x limit sensor magnets
y-drive 2/8x - 2x limit sensors x-cart 2/8x - 2x limit sensor magnets x-drive 2/8x - 2x limit sensors |
la-lsp | 82 | 82.00 |
| 1 | MechParts |
frame-door
2/21x - 2x door sensor mounts
y-drive 7/21x - 5x shaft mounts, 1x limit sensor mount, 1x motor mount x-cart 3/21x - 2x roller/optics mounts, 1x cable carrier mount x-drive 5/21x - 3x motor/gear mount, 2x limit sensor mounts optics-laser 4/21x - 4x laser tube mounts |
la-mpk | 227.0 | 227.00 |
| 1 | Mirror Mount Pack |
optics-laser
1x - 3x flying optics, 1, 2, 3
|
la-mmp | 158 | 158.00 |
| 1 | Panel Pack |
frame-bottom
6/12x - 2x outer separation panel, 2x cable hole cover, 1x entry panel, 1x hole cover
frame-top 4/12x - 2x outer separation panel, 2x cable cover electronics 2/12x - DriveBoard and 24V/5V PSU mount, C14 power socket mount |
la-pan | 89 | 89.00 |
| 1 | Nozzle Assembly |
optics-laser
1x - laser head
|
la-nozb | 118.0 | 118.00 |
| 1 | Optics Accessory Pack |
optics-laser
1x - extra
|
la-oap | 115 | 115.00 |
| 1 | Optics Pack |
optics-laser
1x - laser beam delivery
|
la-lmp | 274.0 | 274.00 |
| 1 | Power Supply Pack |
electronics
1x - DriveBoard power, 5V and 24V
|
la-psu | 58 | 58.00 |
| 1 | Rubber Tape |
optics-laser
1x - between laser tube and mounts
|
la-rubt | 8 | 8.00 |
| 1 | Stepper Driver Pack |
electronics
1/2x - x-drive
electronics 1/2x - y-drive |
la-stpd | 300 | 300.00 |
| 1 | Stepper X-Drive |
x-drive
1x - x-drive
|
la-stpx | 60 | 60.00 |
| 1 | Stepper Y-Drive |
y-drive
1x - y-drive
|
la-stpy | 84 | 84.00 |
| 21 | items | EUR | 2249.00 |
Misumi
Misumi
is an international supplier of
automation components. Hint: You can copy&paste the CSVs from the bottom of this
list directly into the Misumi order page. Hint2: In some countries they require a company account.
| # | item | subsystem | order# | price | total |
|---|---|---|---|---|---|
| 1 | aluminum bracket extrusion |
x-drive
1x - cable carrier base
|
HFLBS5-1410 | 6.0 | 6.00 |
| 50 | angle bracket, single |
frame-bottom
27x - 11x base frame, 16x columns
frame-top 4x - frame frame-door 8x - door connections optics-laser 1x - mirror2 extra 10x - extra |
HBLFSN5 | 0.63 | 31.50 |
| 20 | angle bracket, single, black |
frame-bottom
6x - 6x bottom cross
frame-table 12x - table frame extra 2x - extra |
HBLFSNB5 | 1.32 | 26.40 |
| 38 | angle bracket, double |
frame-bottom
17x - frame
frame-top 10x - frame frame-door 4x - door connections optics-laser 1x - mirror1 extra 6x - extra |
HBLFSD5 | 1.95 | 74.10 |
| 8 | angle bracket, double, light |
y-drive
6x - 5x shaft mount, 1x limit sensor mount
extra 2x - extra |
HBLSD5 | 0.88 | 7.04 |
| 7 | angle bracket, double, heavy |
frame-gantry
4x - gantry frame corners
y-drive 1x - motor mount optics-laser 2x - laser mounts |
HBLFSDW5 | 2.1 | 14.70 |
| 9 | ball bearing 5x19x6mm |
y-drive
6x - idler
x-drive 3x - idler |
B635ZZ | 1.4 | 12.60 |
| 9 | ball bearing 6x19x6mm |
y-drive
6x - 2x gear assembly, 4x pulley assembly
x-drive 2x - 2x gear assembly extra 1x - extra |
B626ZZ | 1.7 | 15.30 |
| 28 | ball bearing 5x14x5mm |
y-cart
8x - roller
x-cart 6x - roller y-drive 8x - spanner idler x-drive 4x - 4x spanner idler extra 2x - extra |
B605ZZ | 1.7 | 47.60 |
| 2 | cable carrier, 20 links |
x-drive
2x - gas assist
|
MHPKS101-19-20-S | 19.30 | 38.60 |
| 1 | cable carrier, 23 links |
y-drive
1x - life line
|
MHPUS102-19-23-S | 29.0 | 29.00 |
| 2 | gas spring |
frame-door
2x - door
|
FGSS22150B | 19 | 38.00 |
| 3 | hinges |
frame-door
3x - door
|
HHPSN5 | 3.6 | 10.80 |
| 1 | alu-composite sheet 1166x356x3mm |
frame-panels
1x - left side
|
HFPAL-3-1166-356 | 38 | 38.00 |
| 2 | aluminium sheet 1166x847x2mm |
frame-panels
2x - bottom
|
PAAL-1166-847-2 | 122 | 244.00 |
| 1 | alu-composite sheet 247x216x3mm |
frame-panels
1x - rear right
|
HFPAL-3-247-216 | 13 | 13.00 |
| 2 | alu-composite sheet 847x213x3mm |
frame-panels
2x - front
|
HFPAL-3-847-213 | 33 | 66.00 |
| 2 | alu-composite sheet 847x268x3mm |
frame-panels
2x - rear top
|
HFPAL-3-847-268 | 24 | 48.00 |
| 2 | alu-composite sheet 847x356x3mm |
frame-panels
2x - rear
|
HFPAL-3-847-356 | 29 | 58.00 |
| 1 | alu-composite sheet 917x356x3mm |
frame-panels
1x - right side
|
HFPAL-3-917-356 | 30 | 30.00 |
| 34 | nut DIN934-like, M3 |
frame-bottom
6x - 4x cable hole covers, 2x entry panel
frame-top 4x - cable hole covers frame-door 4x - 4x door switch x-drive 2x - 2x cable carrier y-drive 4x - 4x limit sensor electronics 6x - 2x power entry module, 4x driveboard extra 8x - extra |
LBNR3 | 0.28 | 9.52 |
| 10 | nut DIN985-like, lock, M4 |
y-drive
4x - 4x bearing clamps
optics-laser 4x - 4x laser tube mount extra 2x - extra |
UNUTZ4 | 0.8 | 8.00 |
| 1 | nut DIN985-like, lock, M5, 100 pack |
y-cart
8/100x - 8x roller shaft
y-drive 24/100x - 4x motor mount, 14x shaft mount, 2x limit sensor, 4x belt spanner x-cart 6/100x - 6x roller shaft x-drive 4/100x - 2x motor mount, 2x spanner idler optics-laser 10/100x - 8x laser mount, 2x lens tube clamp to mount plate extra 48/100x - extra |
PACK-UNUT5 | 15 | 15.00 |
| 1 | panel rubber seal 12m |
frame-bottom
6/12x - seal for separation panels
frame-top 6/12x - seal for entry panel |
HSCP3H-B-12 | 17 | 17.00 |
| 10 | planar bracket, double |
frame-gantry
4x - gantry frame y-rails
frame-top 6x - middle column, separation |
SHPTSD5 | 1.2 | 12.00 |
| 2 | plastic handles |
door-panels
2x - door
|
UPCN19-B-36 | 4.8 | 9.60 |
| 2 | polycarbonate sheet 600x130x3mm |
frame-bottom
2x - compartment separation, bottom
|
PCTBA-600-130-3 | 18 | 36.00 |
| 2 | polycarbonate sheet 600x110x3mm |
frame-top
2x - compartment separation, top
|
PCTBA-600-110-3 | 22 | 44.00 |
| 2 | polycarbonate sheet 809x60x3mm |
frame-door
2x - door slit cover
|
PCTBA-809-60-3 | 11 | 22.00 |
| 2 | polycarbonate sheet 847x143x3mm |
door-panels
2x - door cover front
|
PCTBA-847-143-3 | 24 | 48.00 |
| 2 | polycarbonate sheet 892x847x3mm |
door-panels
2x - door cover top
|
PCTBA-892-847-3 | 100 | 200.00 |
| 1 | drive shaft, stepped |
x-drive
1x - gear assembly
|
SFAJ12-26-F24-P6-T6 | 9 | 9.00 |
| 1 | drive shaft, stepped |
y-drive
1x - gear assembly
|
SFAJ12-40-F16-P6-T16 | 9 | 9.00 |
| 2 | drive shaft, stepped |
y-drive
2x - gear to final pulley
|
SFAJ12-620-F18-P6-T8 | 47 | 94.00 |
| 2 | drive shaft, stepped |
y-drive
2x - final pulley assembly
|
SFAJ12-40-F16-P6-T24 | 9 | 18.00 |
| 42 | screw DIN912-like, M3x10 |
frame-bottom
6x - 4x cable hole covers, 2x entry panel
frame-top 4x - cable hole covers frame-door 4x - 4x door switch y-cart 4x - 4x limit sensor magnets x-cart 4x - 4x limit sensor magnets x-drive 10x - 4x motor mount, 2x cable carrier, 4x limit sensor electronics 4x - 4x power entry module extra 6x - extra |
CB3-10 | 0.13 | 5.46 |
| 16 | screw DIN912-like, M3x16 |
frame-door
4x - door sensor
y-drive 4x - limit sensors electronics 2x - 2x power entry module extra 6x - extra |
CB3-16 | 0.13 | 2.08 |
| 5 | screw DIN912-like, M3x25 |
air-assist
1x - e-valve mount
extra 4x - extra |
CB3-25 | 0.13 | 0.65 |
| 18 | screw ISO7380-like, button, M3x06 |
x-drive
2x - 2x gear assembly top bearing
electronics 4x - 4x psu mount extra 12x - extra |
BCB3-6 | 0.11 | 1.98 |
| 12 | screw DIN912-like, M4x16 |
y-drive
4x - 4x bearing clamps
optics-laser 4x - 4x laser tube mount extra 4x - extra |
CB4-16 | 0.10 | 1.20 |
| 146 | screw DIN912-like, M5x08 |
frame-gantry
16x - 16x planar bracket
frame-top 24x - 24x planar bracket frame-door 8x - 8x door slit cover y-drive 12x - 10x shaft mount, 2x limit sensor optics-laser 4x - 4x laser psu mount electronics 4x - panel mount door-panels 38x - 22x door top, 16x door front extra 40x - extra |
CB5-8 | 0.10 | 14.60 |
| 368 | screw DIN912-like, M5x10 |
frame-gantry
32x - 32x angle brackets
frame-bottom 134x - 66x bracket single, 66x bracket double frame-top 48x - frame connections frame-door 32x - 32x angel brackets frame-table 24x - angle brackets y-drive 4x - 4x motor mount optics-laser 14x - 4x mirror1, 2x mirror2, 8x laser mount extra 80x - extra |
CB5-10 | 0.08 | 29.44 |
| 30 | screw DIN912-like, M5x12 |
frame-door
4x - 4x door switch
x-cart 2x - 2x cable carrier mount plate x-drive 8x - 4x limit sensor mount, 4x gear assembly door-panels 4x - 4x door handle extra 12x - extra |
CB5-12 | 0.12 | 3.60 |
| 28 | screw DIN912-like, M5x16 |
x-cart
5x - 4x mount plates to extrusion end, 1x bottom roller shaft
y-drive 12x - 10x shaft mount, 2x limit sensor mount x-drive 1x - motor mount extra 10x - extra |
CB5-16 | 0.13 | 3.64 |
| 38 | screw DIN912-like, M5x20 |
frame-door
4x - gas spring mount
y-cart 4x - 4x cart-bar y-drive 8x - motor mount x-drive 2x - motor mount optics-laser 12x - 8x laser mount, 2x mirror1, 2x lens tube clamp to mount plate extra 8x - extra |
CB5-20 | 0.13 | 4.94 |
| 8 | screw DIN912-like, adhesive, M5x25 |
y-cart
4x - 4x cart bar
x-cart 2x - 2x cart bar extra 2x - extra |
SUSLB5-25 | 0.4 | 3.20 |
| 162 | screw ISO7380-like, button, M5x06 |
frame-panels
100x - 100x metal sheets
y-drive 2x - cable carrier extra 60x - extra |
BCB5-6 | 0.11 | 17.82 |
| 12 | screw DIN7991-like, sunk, M5x08 |
frame-door
12x - door hinges
|
SFB5-8 | 1.1 | 13.20 |
| 5 | screw DIN7991-like, sunk, M5x12 |
x-drive
5x - cable carrier base
|
SFB5-12 | 1.3 | 6.50 |
| 6 | screw DIN7984-like, low, M5x16 |
y-cart
4x - belt attachment
x-cart 2x - belt attachment |
CBSS5-16 | 0.5 | 3.00 |
| 28 | screw DIN7984-like, low, M5x30 |
x-cart
5x - 5x roller shaft
y-cart 8x - 8x roller shaft y-drive 6x - 4x spanner idler, 2x idler shaft x-drive 3x - 2x spanner idler, 1x idler shaft extra 6x - extra |
CBSST5-30 | 0.54 | 15.12 |
| 4 | shaft coupling, 6 to 6mm |
y-drive
4x - drive shaft
|
MCSSC20-6-6 | 23.4 | 93.60 |
| 1 | timing belt GT 3M, 9mm, 109 teeth |
y-drive
1x - gear assembly
|
GBN3273GT-90 | 7 | 7.00 |
| 1 | timing belt GT 3M, 9mm, 65 teeth |
x-drive
1x - gear assembly
|
GBN1953GT-90 | 7 | 7.00 |
| 1 | timing pulley GT 3M, 18 teeth, bore 5mm |
x-drive
1x - motor pulley
|
GPA18GT3090-A-P5 | 16 | 16.00 |
| 1 | timing pulley GT 3M, 48 teeth, bore 12mm |
x-drive
1x - middle gear pulley
|
GPA48GT3090-A-P12 | 25 | 25.00 |
| 1 | timing pulley GT 3M, 22 teeth, bore 6.35mm |
y-drive
1x - motor pulley
|
GPA22GT3090-A-P6.35 | 16 | 16.00 |
| 1 | timing pulley GT 3M, 60 teeth, bore 12mm |
y-drive
1x - middle gear pulley
|
GPA60GT3090-A-P12-FC59 | 35 | 35.00 |
| 3 | timing pulley GT 3M, 20 teeth, bore 6mm |
x-drive
1x - final gear pulley
y-drive 2x - final gear pulley |
GPA20GT3090-A-P6 | 16 | 48.00 |
| 1 | extrusion 2020, 1564mm |
frame-door
1x - door front bottom
|
HFS5-2020-1564 | 7.4 | 7.40 |
| 1 | extrusion 2020, 57mm, 45deg |
optics-laser
1x - mirror2
|
HFS5-2020-57-LAT45 | 6.5 | 6.50 |
| 2 | extrusion 2020, 80mm |
frame-door
2x - door front
|
HFS5-2020-80 | 2.5 | 5.00 |
| 3 | extrusion 2040, 100mm |
frame-top
3x - separation column
|
HFS5-2040-100 | 4 | 12.00 |
| 2 | extrusion 2040, 1130mm |
frame-bottom
2x - sides
|
HFS5-2040-1130 | 15 | 30.00 |
| 2 | extrusion 2040, 120mm |
frame-bottom
2x - columns
|
HFS5-2040-120 | 4.6 | 9.20 |
| 1 | extrusion 2040, 142mm, mount holes, 45deg |
x-cart
1x - cart-bar
|
HFS5-2040-142-Z5-YA66-RTP-LCT45 | 15.0 | 15.00 |
| 4 | extrusion 2040, 1260mm, black |
frame-table
4x - table wide
|
HFSB5-2040-1260 | 17.66 | 70.64 |
| 1 | extrusion 2040, 148mm, mount holes |
y-cart
1x - cart-bar
|
HFS5-2040-148-Z5-YA20-YB102 | 8.0 | 8.00 |
| 1 | extrusion 2040, 1564mm |
frame-door
1x - door front
|
HFS5-2040-1564 | 14 | 14.00 |
| 4 | extrusion 2040, 1620mm |
frame-bottom
3x - frame front, middle, back
frame-top 1x - back |
HFS5-2040-1620 | 17 | 68.00 |
| 4 | extrusion 2040, 190mm |
frame-bottom
3x - 1x rear bottom, 2x laser psu mount
frame-top 1x - 1x rear top |
HFS5-2040-190 | 3 | 12.00 |
| 1 | extrusion 2040, 320mm |
frame-bottom
1x - rear middle
|
HFS5-2040-320 | 3 | 3.00 |
| 1 | extrusion 2040, 63mm, mount holes |
optics-laser
1x - mirror1
|
HFS5-2040-63-Z5-YA10 | 5.0 | 5.00 |
| 2 | extrusion 2040, 750mm, black |
frame-bottom
2x - bottom cross
|
HFSB5-2040-750 | 8 | 16.00 |
| 1 | extrusion 2040, 55mm |
x-cart
1x - cart-bar
|
HFS5-2040-55-TPW | 7.0 | 7.00 |
| 1 | extrusion 2040, 80mm |
frame-door
1x - door front
|
HFS5-2040-80 | 2.9 | 2.90 |
| 1 | extrusion 2040, 69mm, 45deg |
optics-laser
1x - mirror1
|
HFS5-2040-69-LAT45 | 3.8 | 3.80 |
| 3 | extrusion 2040, 830mm |
frame-door
3x - door top
|
HFS5-2040-830 | 8 | 24.00 |
| 2 | extrusion 2040, 858mm, black |
frame-table
2x - table short
|
HFSB5-2040-858 | 12.08 | 24.16 |
| 3 | extrusion 2040, 860mm |
frame-bottom
2x - cable carrier base extusion
extra 1x - extra |
HFS5-2040-860 | 8 | 24.00 |
| 1 | extrusion 2040, 860mm, black |
frame-bottom
1x - bottom cross middle
|
HFSB5-2040-860 | 8 | 8.00 |
| 1 | extrusion 2040, 96mm, mount holes |
y-cart
1x - cart-bar
|
HFS5-2040-96-Z5-YA46-YB76 | 8.0 | 8.00 |
| 2 | extrusion 2080, 70mm |
y-cart
2x - cart-bar
|
HFS5-2080-70-LTP | 16.0 | 32.00 |
| 2 | extrusion 4040, 100mm |
frame-top
2x - corner top column
|
HFS5-4040-100 | 4 | 8.00 |
| 2 | extrusion 4040, 1130mm |
frame-top
2x - frame side top
|
HFS5-4040-1130 | 15 | 30.00 |
| 8 | extrusion 4040, 120mm |
frame-bottom
8x - columns
|
HFS5-4040-120 | 4 | 32.00 |
| 1 | extrusion 4040, 1418mm |
y-cart
1x - cart-bar
|
HFS5-4040-1418 | 18.0 | 18.00 |
| 1 | extrusion 4040, 1564mm |
frame-door
1x - door rear
|
HFS5-4040-1564 | 20 | 20.00 |
| 1 | extrusion 4040, 1620mm |
frame-top
1x - frame middle sep
|
HFS5-4040-1620 | 21 | 21.00 |
| 1 | extrusion 4040, 190mm |
frame-top
1x - rear side
|
HFS5-4040-190 | 5 | 5.00 |
| 2 | extrusion 4040, 360mm |
frame-bottom
2x - rear corners
|
HFS5-4040-360 | 7 | 14.00 |
| 3 | extrusion 4040, 860mm |
frame-gantry
2x - y-rails, left and right
extra 1x - extra |
HFS5-4040-860 | 10.92 | 32.76 |
| 2 | extrusion 4080, 100mm |
frame-top
2x - side
|
HFS5-4080-100 | 9 | 18.00 |
| 2 | extrusion 4080, 1620mm |
frame-gantry
2x - gantry frame, rear and front
|
HFS5-4080-1620 | 47 | 94.00 |
| 2 | extrusion 4080, 940mm |
frame-gantry
2x - gantry frame, left and right
|
HFS5-4080-940 | 27 | 54.00 |
| 1 | air tube, ODxID 6x4mm, 10m |
air-assist
1x - entry panel to laser head
|
PUT6-10-CB | 10 | 10.00 |
| 3 | one-touch coupling, 6mm, M5 |
air-assist
3x - 1x nozzle coupling, 2x e-valve coupling
|
MSELL6-M5 | 3 | 9.00 |
| 1 | one-touch panel-mount, 6mm |
air-assist
1x - entry panel
|
MSBUL6 | 3 | 3.00 |
| 15 | nut T-slot, pre, M3 |
frame-door
4x - 4x limit sensor magnet
x-cart 4x - 4x limit sensor magnet y-cart 4x - 4x limit sensor magnet air-assist 1x - e-valve mount extra 2x - extra |
HNTE5-3 | 0.50 | 7.50 |
| 13 | nut T-slot, pre, M4 |
optics-laser
3x - 3x mirrors
extra 10x - extra |
HNTE5-4 | 0.45 | 5.85 |
| 29 | nut T-slot, pre, M5 |
y-cart
12x - 8x roller shaft, 4x belt attachment
x-cart 4x - 2x roller shaft, 2x belt attachment y-drive 2x - idler x-drive 1x - idler extra 10x - extra |
HNTE5-5 | 0.45 | 13.05 |
| 601 | nut T-slot, post, M5, lock |
frame-gantry
48x - 16x planar brackets, 32x angle brackets
frame-bottom 134x - angle brackets frame-top 72x - frame connections frame-door 60x - frame electronics 4x - 4x panel mount frame-table 24x - angle brackets y-cart 4x - 4x cart joints x-cart 2x - 2x cable carrier mount plate y-drive 18x - 2x limit sensor, 14x shaft mount, 2x cable carrier x-drive 13x - 4x gear assembly, 5x cable carrier base, 4x limit sensor optics-laser 20x - 6x mirror1, 2x mirror2, 8x laser mount, 4x laser PSU door-panels 42x - 26x door top, 16x door front frame-panels 100x - 100x metal sheets extra 60x - extra |
HNTPZ5-5 | 0.60 | 360.60 |
| 1 | water hose ID 9mm, 10m |
optics-laser
1x - chiller to laser to chiller
|
AHOS9-10 | 21.5 | 21.50 |
| 10 | washer DIN125-like, form A, M4 |
extra
10x - extra
|
PWF4 | 0.13 | 1.30 |
| 250 | washer DIN125-like, form A, M5 |
frame-gantry
16x - planar brackets
frame-top 24x - 24x planar bracket frame-door 24x - 4x door switch, 20gas spring mount y-cart 22x - 22x roller shaft x-cart 52x - 2x cable carrier mount plate, 50x roller shaft y-drive 48x - 12x idler, 36x spanner idler x-drive 44x - 4x gear assembly, 6x idler, 4x limit sensor, 20x cable carrier base, 10x spanner idler extra 20x - extra |
PWF5 | 0.13 | 32.50 |
| 1 | washer DIN9021-like, form G, M4, 50 pack |
y-drive
8/50x - 8x bearing
frame-door 4/50x - 8x door sensor magnet y-cart 4/50x - 8x limit sensor magnet x-cart 4/50x - 8x limit sensor magnet extra 42/50x - extra |
PACK-SPWFN4 | 9.7 | 9.70 |
| 2 | washer DIN9021-like, form G, M5, 20 pack |
frame-door
20/20x - 20x gas spring mount
optics-laser 4/20x - 4x laser psu mount extra 16/20x - 16x extra |
PACK-SPWFN5 | 9.6 | 19.20 |
| 4 | washer precision, ID 6mm |
y-drive
4x - coupling to bearing spacer
|
WASSH12-6-2 | 2 | 8.00 |
| 89 | washer Schnorr-like, lock, M3 |
frame-bottom
12x - 8x cable hole covers, 4x entry panel
frame-top 8x - cable hole covers frame-door 12x - 8x limit sensor, 4x limit sensor magnet y-cart 4x - limit sensor magnet x-cart 4x - limit sensor magnet y-drive 8x - 8x limit sensor x-drive 20x - 4x motor, 12x limit sensor, 4x cable carrier electronics 8x - 4x power entry module, 4x psu mount air-assist 1x - e-valve mount extra 12x - extra |
GTS3 | 0.12 | 10.68 |
| 24 | washer Schnorr-like, lock, M5 |
x-cart
4x - mount plates to extrusion end
extra 20x - extra |
GTS5 | 0.13 | 3.12 |
| 1 | washer/spacer |
x-cart
1x - spacer under ball bearing
|
FWS-D19-V15.0-T1.0 | 8 | 8 |
| 111 | items | EUR | 3059.15 |
ColeTech
ColeTech
is an affordable and reliable supplier of laser tubes and
accessories from China. Apart from requesting a quote
by email they also have an
ebay store
. Most of the time
they also offer laser + power supply packages. Make sure you specify the correct AC voltage (220V or 110V) when ordering. CHILLER OPTION: If you plan on operating the Lasersaur above room temperature 74F (23C) we recommend getting a more performant water chiller. ColeTech will happily quote you for the "CW-5000 chiller". NOTE: Laser tubes are very fragile and do arrive broken occasionally.
Before signing the package check for noises of broken parts, reject, and let Coletech know if this is the case.
| # | item | subsystem | order# | price | total |
|---|---|---|---|---|---|
| 1 | Reci P14 Laser Power Supply |
optics-laser
1x - main laser
|
100WPowerSupply | 500 | 500.00 |
| 1 | Reci S4 100W CO2 Long Life Laser Tube |
optics-laser
1x - main laser
|
reci-S4 | 1000 | 1000.00 |
| 1 | water chiller (specify 220V or 110V) |
optics-laser
1x - main laser
|
WaterChiller | 400 | 400.00 |
| 3 | items | EUR | 1900.00 |
